Research Article
Year 2022,
Volume: 7 Issue: 1, 27 - 39, 30.04.2022
Abstract
References
- Lee, H. K., Pyo, S. H., & Kim, B. R. (2009). On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints. Composite Structures, 87(1), 44-54.
Year 2022,
Volume: 7 Issue: 1, 27 - 39, 30.04.2022
Abstract
This study aims to strengthen single lap adhesive joints by reinforcing with sewage sludge ash (SSA). Micron size SSA was added to the epoxy adhesive at the rates of 0%, 5%, 10%, 15%, 20% and 25% by weight. First, 10-layer glass fiber/epoxy composite laminates to be used as adherent were produced, and then single-lapped connections were created with micro-particle added epoxy adhesive. The effects of SSA particles on the epoxy adhesive were investigated by tensile test. Depending on the tensile test results, the addition of ash at the specified weight ratios increased the shear stress.
Keywords
References
- Lee, H. K., Pyo, S. H., & Kim, B. R. (2009). On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints. Composite Structures, 87(1), 44-54.
There are 1 citations in total.
Details
| Primary Language | English |
|---|---|
| Journal Section | Research Article |
| Authors | |
| Publication Date | April 30, 2022 |
| Acceptance Date | April 26, 2022 |
| Published in Issue | Year 2022 Volume: 7 Issue: 1 |
IMPORTANT NOTES
No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, without the prior written permission of the copyright owners, unless the use is a fair dealing for the purpose of private study, research or review. The authors reserve the right that their material can be used for purely educational and research purposes. All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works.
*Please note that All the authors are responsible for the originality and plagiarism, multiple publication, disclosure and conflicts of interest and fundamental errors in the published works. Author(s) submitting a manuscript for publication in IJEES also accept that the manuscript may go through screening for plagiarism check using IThenticate software. For experimental works involving animals, approvals from relevant ethics committee should have been obtained beforehand assuring that the experiment was conducted according to relevant national or international guidelines on care and use of laboratory animals. Authors may be requested to provide evidence to this end.
**Authors are highly recommended to obey the IJEES policies regarding copyrights/Licensing and ethics before submitting their manuscripts.
Copyright © 2023. AA. All rights reserved