Synthesis of Graphene Nanoplatelet-Alginate Composite Beads and Removal of Methylene Blue from Aqueous Solutions

Year 2023, , 287 - 302, 31.05.2023

Ferda Civan Çavuşoğlu

https://doi.org/10.18596/jotcsa.1196282

Abstract

The discharge of various types of wastewater into natural streams leads to significant problems by increasing the toxicity of the wastewater. For this reason, methods and materials are being developed by researchers in line with effective, economic, and environmental principles. In this study, the removal of methylene blue, a toxic dyestuff, from aqueous solutions was investigated by synthesizing sodium alginate (SA) and graphene nanoplatelet-sodium alginate composite (SA-GNP) beads. The structural characteristics of the materials were analyzed using FTIR, TGA, optical microscope, and SEM methods. All parameters determining the efficiency of the methylene blue adsorption system were optimized in a batch system. The effects of various factors, such as adsorbent amount, contact time, adsorption temperature, dye concentration, solution pH, pHzpc values of SA and SA-GNP beads, presence of different ions, and beads swelling, on the adsorption process, were investigated. To investigate the mechanism of the adsorption system, the adsorption data were fitted to a non-linear form of the Langmuir, Freundlich, and Temkin equilibrium isotherm models, as well as the Pseudo-first-order (PFO), Pseudo-second-order (PSO), and Bangham kinetic models. High regression coefficients were achieved in the studied kinetic and isotherm models (0.86 ≤ R2 ≤ 0.99), and the experimental data were found to be compatible with the model parameters. Maximum adsorption capacities (qm) of 167.52 mg/g and 290.36 mg/g were obtained for the SA and SA-GNP adsorbents, respectively, at 308 K. The optimum temperature for both adsorption systems was found to be 308 K. The efficiency of methylene blue dyestuff removal was improved with graphene nanoplatelet-based adsorbents.

Keywords

Adsorption, alginate, graphene nanoplatelet, isotherm, kinetics, methylene blue.

References

• 1. Balçık Canbolat Ç, Özbey B. Production of cellulose nanocrystalline additive alginate adsorbent for the removal of organic dyes from aqueous solutions and investigation of dye removal efficiency. Düzce University J of Science and Techn. 2021;10:300–8.
• 2. Nasrullah A, Bhat AH, Naeem A, Isa MH, Danish M. High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue. Int J Biol Macromol. 2018;107:1792–9.
• 3. Meral K, Metin Ö. Graphene oxide{magnetite nanocomposite as an effcient and magnetically separable adsorbent for methylene blue removal from aqueous solution. Turkish J Chem. 2014;38(5):775–82.
• 4. Okur M, Aktı F, Çetintaş A. Use of Polyaniline/Alginate Composite Material in the Adsorption of Acid Violet 90 Dye:Kinetics and Isotherm Evaluation. Gazi University J of Science Part C: Design and Techn. 2018;6(4):729–40.
• 5. Khan IA, Hassan MIU, Hussain H, Shah SM, Yasin T. Fabrication and characterization of amidoxime-functionalized silica decorated with copper: A catalytic assembly for rapid reduction of dyes. Turkish J Chem. 2021;45(2):410–9.
• 6. Hameed BH, Ahmad AA. Batch adsorption of methylene blue from aqueous solution by garlic peel, an agricultural waste biomass. J Hazard Mater. 2009;164(2–3):870–5.
• 7. E T, Ma D, Yang S, Hao X. Graphene oxide-montmorillonite/sodium alginate aerogel beads for selective adsorption of methylene blue in wastewater. J Alloys Compd. 2020;832:154833.
• 8. Borghei SA, Zare MH, Ahmadi M, Sadeghi MH, Marjani A, Shirazian S, et al. Synthesis of multi-application activated carbon from oak seeds by KOH activation for methylene blue adsorption and electrochemical supercapacitor electrode. Arab J Chem. 2021;14(2):102958.
• 9. Othman I, Abu Haija M, Kannan P, Banat F. Adsorptive removal of methylene blue from water using high-performance alginate-based beads. Water Air Soil Pollut. 2020;231(8).
• 10. Balkız G, Pingo E, Kahya N, Kaygusuz H, Bedia Erim F. Graphene oxide/alginate quasi-cryogels for removal of methylene blue. Water Air Soil Pollut. 2018;229(4).
• 11. Faysal Hossain MD, Akther N, Zhou Y. Recent advancements in graphene adsorbents for wastewater treatment: Current status and challenges. Chinese Chem Lett. 2020;31(10):2525–38.
• 12. Nigiz FU. Synthesis of a novel graphene–kaolin–alginate adsorbent for dye removal, and optimization of the adsorption by response surface methodology. Res Chem Intermed. 2019;45(7):3739–53.
• 13. Yusuf M, Elfghi FM, Zaidi SA, Abdullah EC, Khan MA. Applications of graphene and its derivatives as an adsorbent for heavy metal and dye removal: a systematic and comprehensive overview. RSC Adv. 2015;5(62):50392–420.
• 14. Madenli Ö, Deveci EU, Gönen Ç. Graphene Applications in Heavy Metal Removal: Adsorption Technology. Fırat University J of Engineering Science. 2021;33(1):151–9.
• 15. Zhang C, Chen Z, Guo W, Zhu C, Zou Y. Simple fabrication of Chitosan/Graphene nanoplates composite spheres for efficient adsorption of acid dyes from aqueous solution. Int J Biol Macromol. 2018;112:1048–54.
• 16. Bai C, Wang L, Zhu Z. Adsorption of Cr(III) and Pb(II) by graphene oxide/alginate hydrogel membrane: Characterization, adsorption kinetics, isotherm and thermodynamics studies. Int J Biol Macromol. 2020;147:898–910.
• 17. Wang Y, Pan J, Li Y, Zhang P, Li M, Zheng H, et al. Methylene blue adsorption by activated carbon, nickel alginate/activated carbon aerogel, and nickel alginate/graphene oxide aerogel: A comparison study. J Mater Res Technol. 2020;9(6):12443–60.
• 18. González-López ME, Laureano-Anzaldo CM, Pérez-Fonseca AA, Gómez C, Robledo-Ortíz JR. Congo red adsorption with cellulose-graphene nanoplatelets beads by differential column batch reactor. J Environ Chem Eng. 2021;9(2).
• 19. Ma J, Jiang Z, Cao J, Yu F. Enhanced adsorption for the removal of antibiotics by carbon nanotubes/graphene oxide/sodium alginate triple-network nanocomposite hydrogels in aqueous solutions. Chemosphere. 2020;242:125188.
• 20. Politaeva N, Yakovlev A, Yakovleva E, Chelysheva V, Tarantseva K, Efremova S, et al. Graphene oxide-chitosan composites for water treatment from copper cations. Water. 2022 Apr 29;14(9):1430.
• 21. Wang M, Li Y, Cui M, Li M, Xu W, Li L, et al. Barium alginate as a skeleton coating graphene oxide and bentonite-derived composites: Excellent adsorbent based on predictive design for the enhanced adsorption of methylene blue. J Colloid Interface Sci. 2022;611:629–43.
• 22. Bajpai SK, Sharma S. Investigation of swelling/degradation behaviour of alginate beads crosslinked with Ca2+ and Ba2+ ions. React Funct Polym. 2004;59(2):129–40.
• 23. Özçelik G, Civan Çavuşoğlu F, Özkara-Aydınoğlu Ş, Bayazit ŞS. Enhanced & effective phosphate recovery from water by indium fumarate & zirconium fumarate metal-organic frameworks: Synthesis, characterization, adsorption, kinetic and isotherm studies. Surfaces and Interfaces. 2022;29(December 2021).
• 24. Liu F, Li W, Zhou Y. Preparation and characterization of magnetic sodium alginate-modified zeolite for the efficient removal of methylene blue. Colloids Surfaces A Physicochem Eng Asp. 2021;629(May):127403.
• 25. Lacerda L, Parize AL, Fávere V, Laranjeira MCM, Stulzer HK. Development and evaluation of pH-sensitive sodium alginate/chitosan microparticles containing the antituberculosis drug rifampicin. Mater Sci Eng C. 2014;39(1):161–7.
• 26. Boddu A, Obireddy SR, Subbarao SMC, Rao KM, Venkata KRKS. Encapsulation of 5-Fluorouracil treated reduced graphene oxide in sodium alginate matrix for controlled and pH-responsive drug delivery. ChemistrySelect. 2021;6(25):6533–40.
• 27. Fan L, Du Y, Huang R, Wang Q, Wang X, Zhang L. Preparation and characterization of alginate/gelatin blend fibers. J Appl Polym Sci. 2005;96(5):1625–9.
• 28. Urzedo AL, Bernardes JS, Pedron T, Batista BL, Akiba N, Gaubeur I, et al. Synthesis and characterization of calcium alginate and cellulose nanocrystal films for lead removal. J Phys Conf Ser. 2019;1323(1).
• 29. Siddaramaiah, Swamy TMM, Ramaraj B, Lee JH. Sodium alginate and its blends with starch: Thermal and morphological properties. J Appl Polym Sci. 2008 Sep 15;109(6):4075–81.
• 30. Lu T, Xiang T, Huang XL, Li C, Zhao WF, Zhang Q, et al. Post-crosslinking towards stimuli-responsive sodium alginate beads for the removal of dye and heavy metals. Carbohydr Polym. 2015;133:587–95.
• 31. Kulig D, Zimoch-Korzycka A, Jarmoluk A, Marycz K. Study on alginate-chitosan complex formed with different polymers ratio. Polymers. 2016; 8(5): 167.
• 32. Li L, Zhao J, Sun Y, Yu F, Ma J. Ionically cross-linked sodium alginate/ĸ-carrageenan double-network gel beads with low-swelling, enhanced mechanical properties, and excellent adsorption performance. Chem Eng J. 2019;372(February):1091–103.
• 33. Abd El-Latif MM, El-Kady MF, Ibrahim AM, Ossman ME. Alginate/polyvinyl alcohol - kaolin composite for removal of methylene blue from aqueous solution in a batch stirred tank reactor. J Am Sci. 2010;6(December 2014):280–92.
• 34. Lafi R, ben Fradj A, Hafiane A, Hameed BH. Coffee waste as potential adsorbent for the removal of basic dyes from aqueous solution. Korean J Chem Eng. 2014 Nov 28;31(12):2198–206.
• 35. Liu T, Li Y, Du Q, Sun J, Jiao Y, Yang G, et al. Adsorption of methylene blue from aqueous solution by graphene. Colloids Surfaces B Biointerfaces. 2012;90(1):197–203.
• 36. Yürekli Y. Determination of adsorption capacities of NaX Nano-particles against heavy metals and dyestuff. J Fac Eng Archit Gazi Univ. 2019;34(4):2113–24.
• 37. Polat H, Zeybek N, Polat M. Tissue engineering applications of marine-based materials. Marine Biomaterials. 2022;205–54.
• 38. Günay A, Dikmen S, Ersoy B, Evcin A. Adsorption of Basic Blue-16 Dye onto Clay. Environ Eng Manag J. 2014;13(2):395–405.
• 39. Xu J, Tian Y, Li Z, Tan BH, Tang KY, Tam KC. β-Cyclodextrin functionalized magnetic nanoparticles for the removal of pharmaceutical residues in drinking water. J Ind Eng Chem. 2022;109:461–74.
• 40. Civan Çavuşoğlu F, Akan S, Arı EA, Çetinkaya E, Çolak E, Daştan GN, et al. Preparation of magnetic activated carbon-chitosan nanocomposite for crystal violet adsorption. Korean J Chem Eng. 2019;36(11):1915–21.
• 41. Dada A.O, Olalekan A.P, Olatunya, A.M, Dada O. Langmuir, Freundlich, Temkin and Dubinin–Radushkevich Isotherms Studies of Equilibrium Sorption of Zn2+ Unto Phosphoric Acid Modified Rice Husk. IOSR J Appl Chem. 2012;3(1):38–45.
• 42. Pormazar SM, Dalvand A. Adsorption of Reactive Black 5 azo dye from aqueous solution by using amine-functioned Fe3O4 nanoparticles with L-arginine: Process optimisation using RSM. Int J Environ Anal Chem. 2022 Jun 21;102(8):1764–83.
• 43. Alamin NU, Khan AS, Nasrullah A, Iqbal J, Ullah Z, Din IU, et al. Activated carbon-alginate beads impregnated with surfactant as sustainable adsorbent for efficient removal of methylene blue. Int J Biol Macromol. 2021;176:233–43.
• 44. Ravi, Pandey LM. Enhanced adsorption capacity of designed bentonite and alginate beads for the effective removal of methylene blue. Appl Clay Sci. 2019;169(October 2018):102–11.
• 45. Rocher V, Siaugue JM, Cabuil V, Bee A. Removal of organic dyes by magnetic alginate beads. Water Res. 2008;42(4–5):1290–8.
• 46. Li C, Lu J, Li S, Tong Y, Ye B. Synthesis of Magnetic Microspheres with Sodium Alginate and Activated Carbon for Removal of Methylene Blue. Materials (Basel). 2017 Jan 20;10(1):84.
• 47. Eltaweil AS, Mamdouh IM, Abd El-Monaem EM, El-Subruiti GM. Highly efficient removal for methylene blue and Cu2+ onto UiO-66 metal–organic framework/carboxylated graphene oxide-incorporated sodium alginate beads. ACS Omega. 2021 Sep 14;6(36):23528–41.