Topografyanın engebeli ve ulaşılması zor olduğu alanlarda yersel ölçüm teknikleri ile ölçüm yapmadaki güçlükler nedeniyle uzaktan algılama teknikleri kullanımını bu tür durumlarda vazgeçilmez kılmaktadır. Gerçek zamanlı kinematik (Real Time Kinematic-RTK) tekniği ile konumsal verilerin doğruluğunda santimetre hassasiyetinde çalışmalar ortaya konulabilmektedir. Ancak topoğrafik yapısı, uydu bazlı konumlamaya uygun olmayan bölgelerde ölçü sonrası veri değerlendirme (Post Processing Kinematik -PPK) ölçüm tekniği alternatif çözüm sağlamaktadır. Bu çalışmanın amacı RTK ve ölçü sonrası veri değerlendirme (PPK) çözümünün Küresel Navigasyon Uydu Sistemleri (GNSS) ve RTK-CORS tarafından sonradan işlenmiş ve düzeltilmiş konumsal ölçümler yoluyla dengelenmiş fotoğraf çiftlerinin ortaya koyduğu hassasiyet değerlendirmektir. Çalışma alanı olarak Düzce ili Tatlıdere Orman İşletme Şefliği sınırları içerisinde kalan özel bir taş ocağı seçilmiştir. RTK ve PPK uygulama modülleri olan DJI Phantom 4 RTK insansız hava aracı (İHA) kullanılarak, taş ocağında eş zamanlı RTK ve PPK modlarında iki uçuş gerçekleştirilmiştir. RTK ve PPK yöntemi ile ortofoto üzerinde belirlenen ortalama konumsal doğruluklar sırasıyla 2,405 cm ve 0,814 cm olarak elde edilmiştir. Bu sonuçlara göre; taş ocağı alanı gibi işletme sonucunda oluşan şevlerde, PPK çözümünün daha uygun olacağı ortaya çıkmıştır.
KAROK 2021
The use of remote sensing techniques makes it indispensable in such cases due to the difficulties in measuring with terrestrial measurement techniques in areas where the topography is rough and difficult to reach. With the Real-Time Kinematic (RTK) technique, studies can be performed with centimetre-level precision in the accuracy of spatial data. However, the Post-Processing Kinematic (PPK) technique provides an alternative solution in regions whose topographic structure is not suitable for satellite-based positioning. The aim of this study is to evaluate the sensitivity of the RTK and PPK solution by pairs of stabilized photographs through post-processed and corrected spatial measurements by the Global Navigation Satellite Systems (GNSS) and RTK-CORS network. A special quarry within the boundaries of the Düzce/Tatlıdere Forestry Operations Directorate was chosen as the study area. Using a DJI Phantom 4 RTK unmanned aerial vehicle (UAV), which has RTK and PPK modules, two simultaneous flights in RTK and PPK modes were carried out in the quarry. The average position accuracies determined on the orthophoto images received by using RTK and PPK methods were obtained as 2.405 cm and 0.814 cm, respectively. According to these results, it has been revealed that the PPK solution would be more appropriate for the slopes formed as a result of the operation, such as the quarry area.
Primary Language | Turkish |
---|---|
Subjects | Forest Industry Engineering |
Journal Section | Forest Management |
Authors | |
Early Pub Date | August 31, 2022 |
Publication Date | September 17, 2022 |
Submission Date | March 26, 2022 |
Published in Issue | Year 2022 Volume: 9 Issue: Özel Sayı |