Sol-jel yöntemi ile zirkonyum fosfat ve poli (etilen oksit) temelli polimer kompozit malzeme (ZRP/PEO) sentezi ve karakterizasyonu

Year 2018, , 748 - 754, 01.04.2018

Asuman Çelik Küçük Emrah Demirkal

https://doi.org/10.16984/saufenbilder.343027

Cited By: 1

Abstract

Bu çalışmada,  sol-jel
yöntemi ile tetraetil ortosilikat (TEOS) ön başlatıcısı varlığında zirkonyum
fosfat  (ZrP) ve Poli (etilen oksit)
temelli ZrP/ PEO kompozit malzemesi üretilmiştir. Hazırlanan malzemenin yapısı
X-ışını difraksiyonu (XRD) ve Fourier transform IR spektroskopisi (FTIR)
yöntemleri ile incelenmiştir. Isısal özellikleri ise termal gravimetrik analiz
(TGA) ile incelenmiştir. TGA analizinde, sentezlenen malzemenin 300 °C’e kadar
kararlı olduğu bulunmuştur. Üretilen bu malzemenin maliyeti düşüktür, ayrıca
ısıtıldığında 100 °C’nin üzerindeki sıcaklıklarda 300 °C ye kadar bozulmaya
uğramamaktadır. 300 °C’ye kadar olan ısısal kararlılığı ve su tutma kabiliyeti
sayesinde ZrP/PEO kompozit malzemesi, ara sıcaklık yakıt pillerinde
kullanılabilme potansiyeline sahiptir.

Keywords

Zirkonyum ve Poli (etilen oksit) temelli kompozit malzeme, sol-jel

Synthesis and characterization of zirconium phosphate and poly(ethylene oxide) based polymer composite

Abstract

In this study, by using tetraethyl orthosilicate (TEOS) as
precursor, a composite material based on the zirkonium phosphate and poly (ethylene
oksit) (PEO) polymer (ZrP / PEO) has been prepared through the sol-gel method.
The characterisation of the obtained material has been carried out by using
flourer transform–infrared spectroscopy (FTIR) and X-ray diffraction (XRD)
methods. Thermal properties have been investigated with thermal gravimetric
analyzing (TGA). It has been founded that ZrP/PEO polymer composite material is
stable even up to 300 °C. Thanks to the thermal stability and water uptake
ability, ZrP/PEO polymer composite is the promising candidate to be used as a
medium temperature fuel-cell electrolyte material. 

Keywords

Zirkonium and Poly(ethylene oxide) based polymer composite, sol-gel, characterization

References

• REFERENCES
• [1] M. Rikukawa, K. Sanui, Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers, Prog. Polym. Sci. vol.25 pp.1463-502, 2000.
• [2] JD. Lichtenhan, Y.A. Otonari, MJ. Gan, Linear hybrid polymer building blocks: methacrylate-functionalized polyhedral oligomeric silsesquioxane monomers and polymers, Macromolecules, vol.28 pp.8435-8437, 1995
• [3] E. S. Cozza, Q. Ma, O. Monticelli and P. Cebe, ‘Nanostructured nanofibers based on PBT and POSS: Effect of POSS on the alignment and macromolecular orientation of the nanofibers’, European Polymer Journal, vol. no. 49, pp. 33–40, 2013.
• [4] R. He, Q. Li, G. Xiao and N.J. Bjerrum, ‘Proton conductivity of phosphoric acid doped polybenzimidazole and its composites with inorganic proton conductors’. Journal of Mebrane Science, vol. 226 pp.169-184, 2003.
• [5] B. Bonnet, D.J. Jones, L. Tchicaya, G. Alberti, M. Casciola, L. Massinelli, B. Bauer, A. Peraio and E. Ramunni, ‘Hybrid organic-inorganic membranes for a medium temperature fuel cell’. Journal of New materials for Electrochemical Systems, vol.3, pp.87-92, 2000.
• [6] Q. Li, R. He, J.Q. Jensen and N.J. Bjerrum, ‘Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100 ◦C’. Chem Mater, vol.15 no.26, pp.4896–4915, 2003.
• [7] M. Linlin, ‘Poly(2,5-benzimidazole)-silica nanocomposite membranes for high temperature proton exchange membrane fuel cell’, Journal of Membrane Science, vol.411-412, pp.91-98, 2012.
• [8] W. Shuang, Z. Chengji, M. Wenjia, Z. Gang, L. Zhongguo, N. Jing, L. Mingyu,‘Preparation and properties of epoxy-cross-linked porous polybenzimidazole for high temperature proton exchange membrane fuel cells’, Journal of Membrane Science 411-412, 54-63, 2012
• [9] X. Meng and Z. Xian, ’Structure and thermal behavior of EPDM/POSS Composite Fiber Prepared by Electrospinning’, Journal of applied polymer science, DOI; 10.1002/app.38349.
• [10] J. R. Stevens and B.E. Mellander, ‘Poly(ethylene oxide)-alkali metal-silver halide salt systems with high ionic conductivity at room temperature‘ Solid State Ionics, vol.21, pp.203-206, 1986.
• [11] I. Honma, Y. Takeda, J.M. Bae, ‘Protonic conducting properties of sol-gel derived organic/inorganic nanocomposite membranes doped with acidic functional molecules’, Solid State Ionics, vol.120, pp.255–264, 1999.
• [12] J. Xi and X. Tang, Nanocomposite polymer electrolyte based on Poly(ethylene oxide) and solid super acid for lithium polymer battery, Chemical Physics Letters, vol. 393, pp.271–276, 2004.
• [13] A. Goni-Urtiaga, D. Presvytes and K. Scott., 'Solid acids as electrolyte materials for proton exchange membrane (PEM) electrolysis: Review' International Journal of Hydrogen Energy, vol.37, pp.3358-3372, 2012.
• [14] A. Clearfield, 'Inorganic ion exchangers with layered structures', Annual Reviews Material Science, vol.14, pp.205, 1984 [15] S.J. Peighambardoust, S. Rowshanzamir, M. Amjadi, ‘Review of the proton exchange membranes for fuel cell applications’, International Journal Of Hydrogen Energy, vol.35, pp.9349-9384, 2010.