In parallel with the continuous increase in the world population, the need for cement is increasing day by day. There has been a need to reduce CO2 emissions resulting from increased production. In this study, the claystones of the Late Miocene Injana Formation around the cities of Karbala and Najaf in Iraq were calcined at 600 oC and 800 oC and their pozzolanic activity was investigated.
Calcined clay stones were replaced with Iraqi region portclant cement at the rates of 5%, 10%, 15% and 20% by weight, and cement mortar samples were obtained with the same water/cement ratios. Changes in compressive strength values as a result of 3, 7, 28 and 56 days of curing periods were examined. It has been argued that the obtained compressive strength values meet the required cement mortar compressive strength value within the framework of the relevant standard, and an optimum calcination temperature and substitution rate has been tried to be revealed.
Dünya nüfusundaki sürekli bir artışa paralel olarak çimentoya olan ihtiyaçta gün geçtikçe artmaktadır. Artan üretim sonucunda da ortaya çıkan CO2 emisyonunu azaltma gerekliliği doğmuştur. Bu çalışmada, Irak’ın Kerbela ve Necef şehirleri civarındaki Geç Miyosen yaşlı Injana Formasyonu’nun kiltaşları 600 oC ve 800 oC’de kalsine edilerek puzolanik aktivitesi araştırılmıştır.
Kalsine edilmiş kil taşları, ırak bölgesi portklant çimentosu ile ağırlıkça %5 %10, %15 ve %20 oranlarında yer değiştirimiş ve aynı su/çimento oranlarında çimento harç örnekleri elde edilmiştir. 3, 7, 28 ve 56 günlük kür süreleri sonucunda basınç dayanımları değerlerindeki değişimler incelenmiştir. Elde edilen basınç dayanımı değerleri ilgili standart çerçevesinde gerekli çimento harcı basınç dayanımı değerini karşıladığı tartışılmış olup optimum bir kalsinasyon sıcaklığı ve ikame oranı ortaya konmaya çalışılmıştır.
Primary Language | Turkish |
---|---|
Subjects | Construction Materials |
Journal Section | Articles |
Authors | |
Early Pub Date | December 31, 2023 |
Publication Date | December 31, 2023 |
Submission Date | November 28, 2023 |
Acceptance Date | December 22, 2023 |
Published in Issue | Year 2023 Volume: 6 Issue: 2 |
Creative Commons Lisansı
Bu eser Creative Commons Atıf 4.0 Uluslararası Lisansı ile lisanslanmıştır.