Within the scope of the study, pre-softening, raising and final softening processes were applied to 2 selected fabrics under different conditions. The raising fastness, air permeability and bursting strength tests were performed on the samples obtained after the processes, and the effect of the process conditions on the researched performance values was examined. This paper is also detailed by statistical analysis. When the results were examined, it was seen that the best result in terms of raising fastness was the fabric with 50% waste + 50% PES back yarn. As a process, it was determined that the best result was obtained after a single passage with micro silicon pre-softening and raising at a speed of 15m / min, and then a low concentration softening process with a polyvinyl acetate-based binder and softener mixture.
TÜBİTAK
3161066
This study was supported by The Scientific and Technological Research Council of Turkey (TÜBİTAK) with Project No: 3161066.
3161066
Primary Language | English |
---|---|
Subjects | Wearable Materials |
Journal Section | Articles |
Authors | |
Project Number | 3161066 |
Publication Date | September 30, 2022 |
Submission Date | January 26, 2021 |
Acceptance Date | October 1, 2021 |
Published in Issue | Year 2022 |