European Journal of Technique (EJT)
Cover Image
Submit Article Send Reviewer Request Aim & Scope Author Guidelines Ethical Principles and Publication Policy Last Issue Archive Editorial Board Contact
...
Login
ISSN 2536-5010 | e-ISSN 2536-5134 | Period Biannually | Founded: 2011 | Publisher Hibetullah KILIÇ | https://ineseg.org/journals/ejt/home


European Journal of Technique (EJT)

ISSN 2536-5010 | e-ISSN 2536-5134 | Period Biannually | Founded: 2011 | Publisher Hibetullah KILIÇ | https://ineseg.org/journals/ejt/home
Cover Image


Volume 10 - Issue 1 - Jun 1, 2020
  1. PERFORMANCE STUDY OF FOUR EQUALIZATION TECHNIQUES OVER A WIRELESS COMMUNICATION CHANNEL
    Pages 1 - 12
    Anwr ELASYRİ
  2. MECHANICAL PROPERTIES OF COMPOSITE PLATES AT DIFFERENT CONDITIONS
    Pages 13 - 24
    Gurbet ÖRÇEN , Kadir TURAN , Sedat BİNGÖL
  3. THE EFFECTS OF HIGH DENSITY POLYETHYLENE ADDITION TO LOW DENSITY POLYETHYLENE POLYMER ON MECHANICAL, IMPACT AND PHYSICAL PROPERTIES
    Pages 25 - 37
    Erkin AKDOĞAN
  4. FEASIBILITY OF GOLD BASED HALL DEVICES FOR BIOSENSING PURPOSES
    Pages 38 - 51
    Davut İZCİ
  5. MARBLE CLASSIFICATION USING DEEP NEURAL NETWORKS
    Pages 52 - 63
    Murat CANAYAZ , Fatih ULUDAĞ
  6. A SIMULATION MODEL FOR CUSTOMER FLOW ANALYSIS IN A COMMERCIAL BANK IN NIGERIA
    Pages 64 - 74
    Mayowa Rafiat AJİBOYE
  7. THE EFFECTS OF WELDING PRESSURE AND REINFORCEMENT RATIO ON WELDING STRENGTH IN DIFFUSION-BONDED AlMg3/SiCp COMPOSITES
    Pages 75 - 85
    Nilhan ÜRKMEZ TAŞKIN, Rifat YAKUT , Engin ALP
  8. MIXING OF BIODIESELS PRODUCED FROM DIFFERENT SOURCES TO JET FUELS AND COMPARISON OF SPECIFICATIONS OF FUEL BLENDS
    Pages 86 - 96
    Fevzi YAŞAR
  9. CRASHWORTHINESS INVESTIGATION OF VEHICLE FRONT BUMPER BEAM WITH DIFFERENT CROSS-SECTIONS UNDER AXIAL DYNAMIC LOAD
    Pages 97 - 105
    Serkan ÖZEL , Selçuk KARAGÖZ , Hüseyin BEYTÜT
  10. EFFECT OF WELDING PARAMETERS ON WEAR PERFORMANCE OF BORON COATING MADE WITH PTA
    Pages 106 - 118
    Musa KILIÇ
  11. PERFORMANCE ANALYSIS OF COOLING SYSTEM WITH HORIZONTAL TYPE GROUND SOURCE HEAT PUMP FOR DIYARBAKIR CONDITIONS
    Pages 119 - 130
    Fatih KOÇYİĞİT
  12. OPTIMIZATION OF PROCESS CONDITIONS FOR ADSORPTION OF METHYLENE BLUE ON FORMALDEHYDE-MODIFIED PEANUT SHELLS USING BOX-BEHNKEN EXPERIMENTAL DESIGN AND RESPONSE SURFACE METHODOLOGY
    Pages 131 - 142
    Sinan KUTLUAY , Orhan BAYTAR , Ömer ŞAHİN , Ali ARRAN
  13. THE ROLE OF STATIC VAR COMPENSATOR AT REACTIVE POWER COMPENSATION
    Pages 143 - 152
    Behçet KOCAMAN , Nurettin ABUT
  14. IDENTIFICATION OF PARKINSON’S DISEASE BY AR MODELLING OF GAIT SIGNALS
    Pages 153 - 159
    Ömer AKGÜN , Aydın AKAN
  15. INVESTIGATION OF ROUTE TRACKING PERFORMANCE WITH ADAPTIVE PID CONTROLLER IN QUADROTOR
    Pages 160 - 172
    Ayşegül SUNAY , Aytaç ALTAN , Egemen BELGE , Rifat HACIOĞLU
  16. EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD
    Pages 173 - 183
    Tayfun ÇETİN , Mehmet AKKAŞ
  17. THOROUGH ANALYSIS OF COMBUSTION AND EMISSIONS OF POWER GENERATOR DIESEL ENGINE AT HIGH IDLING OPERATIONS FUELED WITH LOW PERCENTAGE OF DIFFERENT BIODIESEL BLENDS
    Pages 184 - 195
    Selman AYDIN
  18. A STUDY ON THE EXAMINATION OF THE SINTER METALOGRAPHIC STRUCTURE
    Pages 196 - 206
    Ömer Saltuk BÖLÜKBAŞI
Indexes and Platforms