Research Article
BibTex RIS Cite
Year 2021, , 93 - 100, 01.06.2021
https://doi.org/10.36222/ejt.821257

Abstract

References

  • [1] S. Azadeh and M. Saad, IEEE Transactions on Industrial Electronics, VOL. 58, NO. 4, April 2011 Simulation and Hardware Implementation of Incremental Conductance MPPT with Direct Control Method Using Cuk Converter page 1154-1161. Member, IEEE.

DESIGNING A CONTROL INTERFACE AND PID CONTROLLER OF CUK CONVERTER

Year 2021, , 93 - 100, 01.06.2021
https://doi.org/10.36222/ejt.821257

Abstract

In proportional-Integral (PI) controlled CUK converter, the system is unstable due to the high oscillation caused by excessive integration. A proportional-integral-differential (PID) controlled converter is used to eliminate this instability. In this article, PID design and control of the CUK converter has been implemented. The dynamic model of the system is found from the mathematical analysis of the converter. A fourth order parametric transfer function is obtained here. The converter is simulated in virtual environment by using the obtained parameters. Interface design was carried out to find the control parameters belonging to the system. The control parameters (P, PI and PID) of the system were obtained using the Ziegler-Nichols method. The results were evaluated by simulating the system as uncontrolled, PID controlled and Regulated PID controlled. It has been found that PID control performance is more effective than PI control at different parameter values of CUK converter.

References

  • [1] S. Azadeh and M. Saad, IEEE Transactions on Industrial Electronics, VOL. 58, NO. 4, April 2011 Simulation and Hardware Implementation of Incremental Conductance MPPT with Direct Control Method Using Cuk Converter page 1154-1161. Member, IEEE.
There are 1 citations in total.

Details

Primary Language English
Subjects Electrical Engineering
Journal Section Research Article
Authors

Davut Sevim 0000-0002-0227-4772

Veysel Gider 0000-0001-7538-262X

Publication Date June 1, 2021
Published in Issue Year 2021

Cite

APA Sevim, D., & Gider, V. (2021). DESIGNING A CONTROL INTERFACE AND PID CONTROLLER OF CUK CONVERTER. European Journal of Technique (EJT), 11(1), 93-100. https://doi.org/10.36222/ejt.821257

All articles published by EJT are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı